Durable bench top Ultrasonic Cleaner 4.5L 180W For surgical instruments leb Musical Instruments
|Material of tank
|Material of shell
||0~30 mins adjustable
|Power supply type 1
||AC 100~120V, 60Hz
|Power supply type 2
||AC 220~240V, 50Hz
|Tank inner dimension
|Inner Packing size
||SGS & FCC & CE & RoHS
1. stainless steel tank has resistance to wear and long work life.
2. tank capacity:4.5L, with digital timer & heater control
3. with Stainless steel basket
4.Use just tab water, or industrial alcohol and solvent cleaner for more higher cleaning requirement
5.industrial control chip microcontroller.flexible circuit boards control, more secure & stable
6. Skymen promise you 12 months warrranty.
1 x Digital Ultrasonic Cleaner
1 x Cleaning Basket
1 x Manual
- General Cleaning—use only tap water. Use warm temperature about 50℃ .
- Enhanced Cleaning—add few drops of standard washing up liquid,liquid soap, or detergent into water, other non-acidic cleaning agents can also be used.
- Extensive Cleaning--removing tarnish, carbon & rust from non-plated metals, it is recommended to use specialist cleaning solution in associated using ultrasonic carburetor cleaner machine.
Jewelry industry, medical industry, electronic factory, molding factory, car workshop, diesel workshop, car industry, scientific laboratory, university, dental clinics, eyeglass shop, hardware tools shop, printing industry.
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
- Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
- Instruments with movable parts should be disassembled to facilitate cleaning
- Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
- Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
- Set the control panel per manufacturers’ instructions and start the cleaning process
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.
12 months warranty for Skymen ultrasonic cleaner.
If any technical problem during warranty time, replacement parts will be sent free of charge.
Technical support is also available in whole time.
Our machines undergo an extensive and strict testing and quality control procedure, ensuring every item purchased meet global quality standards.
These payments of T/T,Western Union,Paypal are accepted. If you have any problem with the payment, please leave a message to us.
DHL, EMS and Fedex are our choices. If you prefer other reliable shipping company, please leave a message to us.
Tracking number will be informed within 2-3 work days after delivery goods. If you have any problem with it, please leave a message to us.
Any comments, suggestions are accepted. We will be very grateful to your positive footprints left in our company. If you have any problem with our products, please leave a message to us.
Any damage or shortage of our goods after you receive your items, please take some photos for a witness. We will deal with it in 24 hours. Frequently, we will send a new part of items for heavy-damage. Before refund is accepted, please leave a message to us.